Engineering Hydrology - B.Tech 5th Semester Exam., 2019
Engineering Hydrology
Instructions:
- All questions carry equal marks.
- There are NINE questions in this paper.
- Attempt FIVE questions in all.
- Question No. 1 is compulsory.
-
Which of the following recording rain gauges does not produce the mass curve of precipitation as record?
-
Depth-area-duration curve of precipitation is drawn as
-
An isohyet is a line joining point having
-
Main annual runoff of \( 1 \,\, m^3/s \) from a catchment of area \( 31.54 \,\, km^2 \) represents an effective rainfall of
-
An area is classified as a drought-prone area if the probability P of occurrence of a drought is
-
The average pan coefficient for a standard US weather bureau class A pan is
-
The chemical that is found to be most suitable as water evaporation inhibitor is
-
A unit hydrograph has one unit of
-
The surface joining the static water levels in several wells penetrating a confined aquifer represents
-
The dimension of the coefficient of transmissibility T is
-
Discuss the hydrological water budget with the aid of examples. What are the significant features of global water-balance studies?
-
A catchment area has seven rain gauge stations. In a year, the annual rainfall recorded by the gauges is as follows:
Station P Q R S T U V Rainfall (cm) 135.0 142.1 122.2 108.5 165.2 102.1 146.9 (i) Determine the standard error in the estimation in mean rainfall in the existing set of rain gauges.
(ii) For a 5% error in the estimation of the mean rainfall, calculate the minimum number of additional rain gauge stations to be established in the catchment.
-
What are the different methods of recording of rainfall?
-
Assuming the initial infiltration rate of \( 10 \,\, mm/h \), final infiltration rate of \( 5 \,\, mm/h \) and the constant value (describing the rate of decay of the difference between the initial and final infiltration rates) as \( 0.95 \,\, h^{-1} \), calculate the total infiltration depth for the storm lasting 6 h.
-
Define infiltration capacity. Discuss the factors affecting the infiltration capacity of an area.
-
Following observations were made for conducting the water budget of a reservoir over a period of one month of 30 days:
Average surface area \( = 10 \,\, km^2 \)
Rainfall \( = 10 \,\, cm \)
Mean surface inflow rate \( = 10 \,\, m^3/s \); mean surface outflow rate \( = 15 \,\, m^3/s \)
Fall of reservoir level \( = 1.50 \,\, m \); pan evaporation \( = 20 \,\, cm \)
Assume pan evaporation coefficient \( = 0.70 \).
Estimate the average seepage discharge during the month.
-
Describe briefly the surface water resources in India.
-
What is meant by 75% dependable yield of a catchment? Indicate a procedure to estimate the same by using annual runoff volume time series.
-
For a catchment in Bihar, India, the mean monthly temperatures are given:
Month Jan Feb Mar Apr May Jun Temp (°C) 10 16 22 27 34 41 Rainfall \( (P_m)[cm] \) 5 3 2 0 3 15 Month Jul Aug Sep Oct Nov Dec Temp (°C) 39 35 30 27 17 11 Rainfall \( (P_m)[cm] \) 35 38 24 2 0 2 Estimate the annual runoff and annual runoff coefficient by Khosla's method.
-
Describe the S-curve method of developing a 6 h unit hydrograph by using 12 h unit hydrograph of the catchment.
-
Given below are observed flows from a storm of 6 h duration on a stream with a catchment area of \( 500 \,\, km^2 \):
Time (h) 0 6 12 18 24 30 36 Observed flow \( (m^3/s) \) 0 100 250 200 150 100 70 Time (h) 42 48 54 60 66 72 Observed flow \( (m^3/s) \) 50 35 25 15 5 0 Assuming the base flow to be zero, derive the ordinates of the 6 h unit hydrograph.
-
Distinguish between the following:
(i) Aquifer and Aquitard
(ii) Unconfined aquifer and a Leaky aquifer
(iii) Water table and Piezometric surface -
A well is located in a 25 m confined aquifer of permeability 30 m/day and storage coefficient 0.005. If the well is being pumped at a rate of 1750 lpm, calculate the drawdown at a distance of (i) 100 m and (ii) 50 m from the well after 20 hour of pumping.